Yes, it’s time for another one of those random mid-week lockdown projects! When I stripped down my dashboard a few weeks back I noted that the main fascia panel was going to need some work before it went back in….
With the main panel replacements finally finished on the right hand side of the car, I wasted no time in moving onto the other side before I lost my momentum. I’m not going to be posting too many updates about…
Yep. It’s trying to remove all these stickers from Heritage panels – probably about 50 hours of labour in these alone 🙂
After weeks of preparation, fitting, re-fitting and adjustments I’m happy to have finally got the offside rear wing fully welded up at last. It’s such a large panel, which joins onto no less than 6 other panels – all of…
Another weekend of lockdown rolls around, so what else is one to do but work on the car again! I planned to finally finish welding up that back wing, but annoyingly I ran out of both welding wire and gas…
I’ve been making some good progress on the bodywork over the last few days, but fitting the offside rear wing has just taken me a full weekend of painting and welding, and it’s still not yet completely welded up –…
With a nice long lockdown-mandated Easter weekend at home I’ve made a bit more progress on the metalwork, finally getting that boot floor corner panel into position and welded in. Easy enough to get it plug welded onto the edge…
Whilst the restoration of my car’s bodywork edges slowly onwards, I thought I’d write an update on the plans I’ve been making for upgrading the drivetrain later on. As the post title kind of gives away, these are now going…
Slightly slow progress over the last few weeks as the world gets turned upside-down by COVID-19, but hopefully a silver lining of being housebound for the foreseeable future is that I’ll have a bit more free time to spend on…
I’ve been chopping the old boot floor to bits over the last fews weeks as I’ve replaced other bits around it, so I thought I’d collect a few photos together into a single post for reference. I deliberated a little…